Inqanaba loFakelo lokuBonisa i-LED-Imibuzo ebuzwa rhoqo

Ukufakela umboniso we-LED wesiteji kufuna ukucwangciswa ngokucokisekileyo kunye nokwenziwa ukuqinisekisa ukusebenza kakuhle kunye nokuphila ixesha elide. Apha ngezantsi kukho iimpendulo kwimibuzo eqhelekileyo enokukunceda ukukukhokela kwinkqubo, ukuqinisekisa ukuba iqonga lakho liyasebenza kwaye lithembekile.

I-Q1: Ngawaphi amalungiselelo afunekayo ngaphambi kokufaka umboniso we-LED wesiteji?

Ngaphambi kokufaka, amanyathelo amaninzi kufuneka athathwe:

• Uvavanyo lweSiza: Qinisekisa ukuba indawo inqanda imimoya enamandla, izandyondyo zemvula, kunye nemiqobo evela kwizakhiwo ezikufutshane.

• Ukuhlolwa koLwakhiwo: Qinisekisa ukuba iindonga okanye izakhiwo zenkxaso zinokuthwala ubuncinci amaxesha angama-1.5 ubunzima bomboniso.

• Amandla kunye noCwangciso lweNethiwekhi: Cwangcisa iisekethe zamandla ezinikezelweyo kunye nokuhanjiswa komqondiso ngefiber optic okanye iintambo ze-Ethernet.

• Ukuthintela imozulu: Indawo evaliweyo yokubonisa kufuneka ibe ne-IP65+ yokukala amanzi; fakela iintonga zombane okanye iinkqubo zokumisa.

I-Q2: Indlela yokukhetha indlela efanelekileyo yokufakela ukusetyenziswa kwesiteji?

Khetha indlela yokuhlohla efanelekileyo ngokusekwe kwiimfuno zakho:

• Ixhonywe eludongeni: Ifanelekile kwiindonga zekhonkrithi okanye izitena; ukhuselekile usebenzisa iibholithi zokwandiswa.

• Ukuma / Ukunyuswa kwePali: Ifuna isiseko esinzulu (≥1.5m) sozinzo kwiindawo ezivulekileyo njengezigaba.

• Inqunyanyisiwe: Ifuna inkxaso yentsimbi; qinisekisa ukulungelelana ukuthintela ukuthambeka, okubalulekileyo kwiqonga lobuhle nokhuseleko.

I-Q3: Indlela yokuqinisekisa ukusebenza kokungena kwamanzi kwiindawo zeqonga?

Ukukhusela ukufuma:

• Ukutywinwa: Sebenzisa i-gaskets engenamanzi phakathi kweemodyuli kwaye usebenzise i-silicone sealant kwizithuba.

• Ukuhanjiswa kwamanzi: Faka imingxuma yokuhambisa amanzi emazantsi ekhabhinethi ukuthintela ukuqokelelwa kwamanzi.

• Ukhuseleko lokufuma: Izibonelelo zamandla kunye namakhadi okulawula kufuneka agcinwe kwiimeko zokukhusela okanye zenzelwe ukuxhathisa ukufuma.

I-Q4: Indlela yokucwangcisa amandla kunye neentambo zesignali ngokufanelekileyo?

Ulawulo olululo lwentambo lubalulekile:

• Iisekethe ezizinikeleyo: Amandla imodyuli nganye okanye ibhokisi yolawulo ngokuzimeleyo ukunqanda ukugcwala.

• Ukhuseleko lweCable: Shield imigca yamandla kunye nePVC okanye iiconduits zetsimbi; gcina iintambo zomqondiso ubuncinci be-20cm kude neengcingo zombane ophezulu.

• UKhuseleko lweSurgery: Ukumelana nomhlaba kufuneka kube ngaphantsi kwe-4Ω; yongeza izikhuseli zokunyuka kwimigca yomqondiso.

I-Q5: Amanyathelo okulungisa emva kokufakela kwimiboniso yeqonga?

Emva kofakelo, yenza olu hlolo:

• I-Pixel Calibration: Sebenzisa isoftware ukulungisa ukukhanya kunye nokufana kombala, ukuthintela ukutenxa kombala.

• Uvavanyo lokukhanya: Lungiselela iimeko zokukhanya kwe-ambient (≥5,000 nits ngexesha lasemini; ngaphantsi ebusuku).

• Uvavanyo loMqondiso: Jonga i-HDMI/DVI igalelo lokudlala kakuhle, uqinisekise ukuba akukho ziphazamiso ngexesha lentsebenzo.

I-Q6: Iingcebiso zokugcinwa rhoqo kwimiboniso ye-LED yesigaba?

Ukugcinwa rhoqo kuqinisekisa ubomi obude:

• Ukucoca: Susa uthuli ngeebrashi ezithambileyo; kuphephe ukusebenzisa iijethi zamanzi ezinoxinzelelo oluphezulu.

• Ukuhlolwa kweHardware: Qinisa izikrufu kwaye uhlole izixhaso ngekota.

• Ukugcinwa kweNkqubo yokuPholisa: Coca iifeni kunye nezihluzo zomoya womoya rhoqo. Ubushushu obusebenzayo: -20°C ukuya kuma-50°C.

I-Q7: Indlela yokusingatha iimeko zemozulu ezimbi kakhulu (ii-typhoons / imvula enkulu) ukulungiselela ukusekwa kweqonga?

Lungiselela imozulu embi:

• Umbane ucimile: Nciphisa umbane ngexesha lezaqhwithi ukunqanda ukonakala kombane.

• Ukomelezwa: Yongeza iintambo ezinganyangekiyo emoyeni okanye ususe okwethutyana iimodyuli kwiindawo ezixhatshazwe sisitshingitshane.

I-Q8: Ziziphi izinto ezichaphazela ixesha lokuphila kwesiboniso se-LED?

Iingqwalasela eziphambili ziquka:

• Ubushushu: Ubushushu obuphezulu bukhawulezisa ukuguga; faka iinkqubo zokupholisa.

• Ixesha lokuSebenza: Nciphisa ukusebenza kwemihla ngemihla ukuya ngaphantsi kweeyure ezili-12 kwaye uvumele amaxesha okuphumla aphakathi.

• Ukuvezwa kokusiNgqongileyo: Kwiindawo eziselunxwemeni okanye ezinothuli, sebenzisa izinto ezichasene ne-corrosion ezifana neekhabhinethi ze-aluminium.

Ngokulandela ezi zikhokelo, unokwandisa ukusebenza kunye nokuphila ixesha elide kwesiboniso sakho se-LED, uqinisekise ukuba sisebenza ngokuthembekileyo nangempumelelo kuyo nayiphi na indawo.